Kabelmanagement

Rangeerpanelen 19"/1U zijn geschikt voor de routering van koper-en glasvezelkabels, in het bijzonder voor patchsnoeren in racks of kasten met 19" montageprofielen en rails. Legborden vervullen dezelfde functie, in het bijzonder voor...
Rangeerpanelen
1U, 2U, zwart, 5 beugels
19"/1U and 19"/2U horizontal cable management panels.
With plastic brackets in various sizes (height/depth), assembled at the front.
Oval openings for front to rear cabling.
Rangeerpanelen
1U, 2U, licht grijs, 4 beugels
19‘‘/1U and 19‘‘/2U management panels, light grey, Swiss Standard.
Assembled with 4 metal support brackets.
Vertikaal kabelbeheer
42U, zwart, hoge dichtheid
Vertical high-density cable management unit, 42U, 112 mm depth, with 41 T-shape plastic fingers.
Aluminium base with 5 openings.
Easily removable cover, divided in three sections.
Comes with a set of rear blanking panels, 8 mounting kits M5,...
Vertikaal kabelbeheer
15U - 45U, zwart, standaard
1. Vertical cable management units, 15U - 45U, plastic ducts with duct cover.
Variants ≥ 33U come with divided duct cover for easier handling.
Oval openings for front to rear cabling.
(Installation requires an appropriate holder)
2. Holders for...
Horizontaal kabelbeheer
1U, 2U, zwart, standaard
19"/1U and 19"/2U horizontal cable management units.
Plastic duct with removable cover.
Openings for front to rear cabling.
Horizontaal kabelbeheer
1U - 3U, zwart, aluminium basis
19" horizontal cable management units, 1U-3U, 112 mm depth.
With 10 T-shape plastic fingers, aluminium base and easily removable cover.
Comes with mounting kit.
Front to rear duct for cable management, black.
With radius at the ends.
64 mm width, 134 mm height, length (depth) adjustable from 440 to 750 mm.
Comes with two end pieces with radius and 4 screws M5.
Draadgoten – vertikaal
15U - 48U, metaal
Basket trays for vertical cable management between the 19" extrusions (rails).
Comes with 2 vertical holders and mounting kit.
Installation in Datwyler racks DNRP and DNRS: on vertical holders (enclosed).
Installation in Datwyler racks DSRP...
Rasters voor kabelbeheer
Zijwanden in rastervorm, 181 mm hoogte, licht grijs
Side grids for cable management, light grey.
For rack depths 600, 800 or 1000 mm.
Installation behind the 19" extrusions (rails).
Comes with 4 holders (delivery without cable ties).
C-rail voor kabelgeleiding
Installatie achter de 19" montageprofielen.
C-Rails for cable management.
For rack depths 800 or 1000 mm.
Installation behind the 19" extrusions (rails).
Comes with 2 holders (delivery without cable ties).
Compatible with standard cable clabs for slot size 16-17mm.
Cable brackets, plastic, equipped with metal flanges.
To be mounted on the 19" extrusion (rails).
Variants are available for horizontal and vertical cable management.
Rangeerbeugels
gegalvaniseerd
Rangeerbeugels, in Metaal, uitgerust met metalen flenzen.
Om gemonteerd te worden op de 19" montageprofielen.
Varianten voor zij- of front-kabelinvoer zijn beschikbaar.
Horizontal cable manement holder set.
For cable trays and side cable management.
For rack depths 600 mm (DNRS, DSRS) and 800 mm (all Datwyler racks).
Comes as a pair including mounting kit.
19"/1U horizontal cable holder.
36 positions.
Delivery without cable ties.
Zijpanelen voor kabelbeheer
15U - 48U, metaal, geperforeerd
Perforated sheet steel side panels for cable management inside racks.
150 mm width.
Can be mounted on the top and bottom frame of the rack.
Set includes one panel and mounting kit.