Search results 1 until 10 of 3206

1.Measurement / Patch cord PS-GG45 7A

Measurement / Patch cord PS-GG45 7A IEC 60603-7- (RJ45)IEC 60076-3-110 (GG45, not backward compatible with RJ45)ISO/IEC 11801:2002/Amd.1:2008 and Amd.2:2010 (Class FA)EN 50173-1:2011 GG45TM is a registered trade name of NEXANS. Patch cords with PS-GG45 7A plugs allow for Class FA compliant cabling systems (up to 1000 MHz) and for Class F installations (up to 600 MHz). The PS-GG45 7A plug uses only 4 x 2 contacts in the top nd bottom corners of the PS-GG45 7A module, whereby best NEXT und RL… 

2.Adapter patch cords PS-GG45 7A / RJ45 4P

Adapter patch cords PS-GG45 7A / RJ45 4P GG45TM is a registered trade name of NEXANS As PS-GG45 7A plugs are not compatible with RJ45 jacks, the RJ45 jacks in active devices can be connected to the high-performance cabling system with adapter patch cords only.These flex cables are fitted with a PS-GG45 7A plug on one side and a RJ45 plug on the other side.Future viabilityGG45 cabling systems that use standard patch cords (RJ45/RJ45) provide enough electrical reserve capacities for 10-gigabit… 

3.RJ45 patch cords Cat.6A IEC

RJ45 patch cords Cat.6A IEC Cat.6A, Class EA for 10GBase-T and 1GBase-T, CATV 862 MHz shielded Shielded patch cords and connection cables with shielded RJ45 plug on both ends, fitted with an overmoulding and an anti-snag boot in the same colour as the cable sheath and with latch protection. The cable CU 7702 flex 4P (Cat.7) offers excellent Next and impedance values due to the individually foil screened pairs (PiMF).Due to the overall copper braid, the patch cables have an excellent screen… 

4.RJ45 measurement cable Cat.6A (IEC)

RJ45 measurement cable Cat.6A (IEC) RJ45 measurement cable Cat.6A (IEC) up to 500 MHz, shielded, with serial numbers for documentation (set with 2 pieces). For Channel link acceptance testings of Class D, E and EA cabling.When using test devices with dual measurement capability this cable is also suitable for Permanent Link measurements. IEC 61935-2:2010 (Cat.6A)ISO/IEC 11801:2001/Amd.2:2010 (Class EA)EN 50173-1:2011 Pack:in resealable plastic bagCable sheath:orange, halogen-freeAnti-snag… 

5.RJ45 patch cords IP67 Cat.6A (IEC)

RJ45 patch cords IP67 Cat.6A (IEC) IEEE 802.3at Cat.6 / Class E Variant with IP67 RJ45 plugs on both sides shielded EN 60811-2-1 (IEC 60811-404) Patch cord:plug AIP67 RJ45, grey plug BRJ45, anti-snag boot grey The IP67 plugs are compatible with Datwyler´s IP67 RJ45 connection components:Article No. 185719, 185725, 185726, 417530 Datwyler's patch cords and connection cables IP67 Cat.6A are especially suitable for the harsh, industrial environment. The IP67 RJ45 plug is compatible with the… 

6.Intelligent 10-pin Keystone patch cords

Intelligent 10-pin Keystone patch cords 500 MHz, shielded Jumper connection to electronic patch panels / Intelligent Patch Panel. Complies to standard ANSI/EIA/TIA 568-C.2, ISO/IEC 11801:2002 / Amd 2:2010 and EN50173 (2011). 50 micro-inch gold plating nickel phosphor bronze. With LED to assist the identification of a patch cord connection and to locate the other end of the patch cord when one end is connected to the patch panel. Quick identification of patch cords when connected to Intellegent… 

7.RJ45 patch cords Cat.5/5e

RJ45 patch cords Cat.5/5e IEEE 802.3at The Datwyler patch cords and connection cables are fitted with a shielded RJ45 plug and a moulded anti-snag boot on both ends. The cable CU 5502 flex 4P offers an excellent screen performance due to its overall copper braid and is highly flexible.Standard assortment: from 0.5 m until 20 m. Customised adjustments (anti-snag boot, termination, label) are available at short notice. Cat.5 / 5e / Class D for 100Base-T and 1GBase-T Shielded Up to 1 Gbit/s… 

8.RJ45 patch cords Cat.6 UTP

RJ45 patch cords Cat.6 UTP IEEE 802.3af better than Cat.6 / Class E Datwyler's unshielded Cat.6 RJ45 patch cords and connection cables (up to 250 MHz) are fitted with a shielded RJ45 plug and a coloured moulded anti-snag boot on both ends.Plugs and anti-snag boots form one unit.The shielded RJ45 plugs provide for better performance.The CU 602 4P flex cable is suitable for transmission rates up to 250 MHz. Up to 1 Gbit/s IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2 250 MHz, unshielded, wiring… 

9.RJ45 patch cords Cat.6 UTP .

RJ45 patch cords Cat.6 UTP . Applicable for all applications up to Class E (250 MHz), for example Gigabit Ethernet 1000Base-T, Fast Ethernet 100Base-T, ISDN, and PoE according to IEEE 802.3af. One patch cord, bundled as a ring in a plastic bag. RJ45 patch cord, Cat.6 (up to 250 MHz), unshielded, with a RJ45 plug (Cat.6) and a moulded anti-snag boot on both ends.Unshielded flexible cable U/UTP, 250 MHz, 4P, AWG 24.Cable sheath made of FR/PVC, also available as FRNC/LS0H.RJ45 plugs (8/8) Cat.6… 

10.Intelligent 10-pin Keystone patch cords

Intelligent 10-pin Keystone patch cords Jumper connection to electronic patch panels / Intelligent Patch Panel. Complies to standard ANSI/EIA/TIA 568-C.2, ISO/IEC 11801:2002 / Amd 2:2010 and EN50173 (2011). 50 micro-inch gold plating nickel phosphor bronze. With LED to assist the identification of a patch cord connection and to locate the other end of the patch cord when one end is connected to the patch panel. Quick identification of patch cords when connected to Intellegent Management Unit… 
Search results 1 until 10 of 3206