CU 7150 4P / 2x4P F8 Multimedia

Data cable, S/FTP, Category 7A, AWG22, Euroclass Dca

1 Inner conductor: AWG22 Bare copper wire
2 PE insulated conductor: 1.6 mm Ø
3 Screen (pair): Alu PETP foil
4 Overall screen: Tinned braided copper
5 Outer sheath: FRNC/LSOH

Description

Electrically and mechanically superior quality Cat.7A data cable - exceeds the requirements of ISO/IEC 11801, IEC 61156-5, IEC 61156-7, EN 50173-1 and EN 50288-9-1.
Excellent shielding effect due to individually screened pairs and overall copper braid.
Easy identification of wires thanks to longitudinal colour markings.
Compatible with all current connecting hardware in accordance with EN 50173 and ISO/IEC 11801.
Data cable for structured premises cabling. For the transmission of digital and analogue voice, video and data signals.
Suitable for all ICT network applications up to class FA applications (1000 MHz) in accordance with EN 50173-1 and ISO/IEC 11801.
Optimized for the transmission of broadband signals (such as cable TV) in accordance with ISO/IEC 11801-4.
Due to the increased wire section eminently suited for Power over Ethernet PoE / PoE+ / 4PPoE up to 100W. Fully supports the application of HDBaseT (TM) Spec 1.0 and Spec 2.0
Category   5e66A7CATV7A61156-7 
Frequency [MHz]1410100250500600862100012001500
Attenuation [dB/100 m]1.73.24.916.226384049545868
NEXT [dB]103103103103103989692908580
PS NEXT [dB]100100100100100959389878277
ACR-N [dB]101100988777605643362712
PS-ACR-N [dB]989795847457534033249
ACR-F [dB]1101081069484716658554641
PS-ACR-F [dB]1071051039181686355524338
Return loss [dB]2630333328262524232320
These performance data are typical measured values.
Category:Cat.7A
Coupling attenuation:85 dB
Delay Skew:17 ns/100 m
Impedance at 100 MHz, ±5Ω:100 Ω
Loop resistance at 20°C:< 111 Ω/km
Near end unbalance attenuation LCL at 1-600 MHz:40 dB
NVP %:80
operating capacity:41 pF/m
Transfer impedance 1/10/30 MHz:< 5/5/8 mΩ/m
10Base-T, 100Base-T, 1000Base-T, 2.5GBase-T, 5GBase-T, 10GBase-T
Minimum bending radius during installation:60 mm
Minimum bending radius permanently installed:30 mm
Tensile strength (4P):130 N
Tensile strength (2x4P):260 N
Minimal crush resistance / 10cm:1,000 N
Minimum number of impacts:10
Installation temperature:0 °C - +50 °C
Operating temperature:-20 °C - +60 °C

Reaction to fire (Euroclasses)

EN 13501-6: Dca

Wire colour

white-blue/bluewhite-orange/orangewhite-green/greenwhite-brown/brown(with longitudinal stripes)in accordance with IEC 60189 and IEC 60708

Imprint

DATWYLER «cable type» «additional text» «batch number» «meter marks»

Zero halogen, no corrosive gases

IEC 60754-1/-2, EN 60754-1/-2, VDE 0482-754-1/-2, AREI-RGIE Art.104-SA

Flame propagation

IEC 60332-1-2, EN 60332-1-2, VDE 0482-332-1-2, AREI-RGIE Art.104-F1

Flame spread

IEC 60332-3-24, EN 60332-3-24, AREI-RGIE Art.104-F2

Smoke density

IEC 61034-1/-2, EN 61034-1/-2, VDE 0482-1034-1/-2, AREI-RGIE Art.104-SD

PoE

IEEE 802.3bt

EMC

shielded

Segregation class

d

Cat./Class

Cat 7A / Class FA - limit values as specified by IEC 61156-5, IEC 61156-7 and EN 50288-9-1 guaranteed

Documentation

ENDENLFRCNESIT
Product Datasheet
Tender text
GHMT PVP Certificates
GHMT PM/Channel Certificates
Transmission Parameter

Versions

Article No.DoPProductReaction to fire (Euroclasses)Dimensions n x p x [mm (AWG)]SheathSheath colourSheath Ø [mm]Weight [kg/km]Cu rate [kg/km]Fire load [MJ/m]Fire load [kWh/m]PU
18292500DKCU 7150 4PDca-s2,d1,a14 x 2 x 0.64 (AWG22)FRNC/LS0Horange7.86540.20.62 MJ/m0.181000 m drum
18292500DLCU 7150 4PDca-s2,d1,a14 x 2 x 0.64 (AWG22)FRNC/LS0Horange7.86540.20.62 MJ/m0.18500 m drum
18292600DLCU 7150 2x4PDca-s2,d1,a12 x (4 x 2 x 0.64 (AWG22))FRNC/LS0Horange1613180.41.24 MJ/m0.36500 m drum

Related products

Patch panel KS 24x

for 24 modules with Keystone fitting

KS-TC Plus Cat.6A (IEC) tool-less, compact

RJ45 module, shielded, Category 6A (IEC)