Kabel-Management

Rangierpanel 19"/1HE dienen der geordneten Führung von Kabeln, insbesondere von Kupfer- und Glasfaser-Patchkabeln in Schränken und Wandgehäusen mit 19"-Befestigungsmaß. Kabelablagen erfüllen dieselbe Funktion, insbesondere bei Trunk-Kabeln....
Rangierpanel
1HE, 2HE, schwarz, 5 Bügel
19"/1U and 19"/2U horizontal cable management panels.
With plastic brackets in various sizes (height/depth), assembled at the front.
Oval openings for front to rear cabling.
Rangierpanel
1HE, 2HE, lichtgrau, 4 Bügel
19‘‘/1U and 19‘‘/2U management panels, light grey, Swiss Standard.
Assembled with 4 metal support brackets.
Kabel-Manager - senkrecht
42HE, schwarz, High-Density
Vertical high-density cable management unit, 42U, 112 mm depth, with 41 T-shape plastic fingers.
Aluminium base with 5 openings.
Easily removable cover, divided in three sections.
Comes with a set of rear blanking panels, 8 mounting kits M5,...
Kabel-Manager - senkrecht
15HE - 45HE, schwarz, Standard
1. Vertical cable management units, 15U - 45U, plastic ducts with duct cover.
Variants ≥ 33U come with divided duct cover for easier handling.
Oval openings for front to rear cabling.
(Installation requires an appropriate holder)
2. Holders for...
Kabel-Manager - waagerecht
1HE, 2HE, schwarz, Standard
19"/1U and 19"/2U horizontal cable management units.
Plastic duct with removable cover.
Openings for front to rear cabling.
Kabel-Manager - waagerecht
1HE - 3HE, schwarz, Aluminium-Basis
19" horizontal cable management units, 1U-3U, 112 mm depth.
With 10 T-shape plastic fingers, aluminium base and easily removable cover.
Comes with mounting kit.
Kabelrinne - vorn nach hinten
schwarz, tiefenverstellbar
Front to rear duct for cable management, black.
With radius at the ends.
64 mm width, 134 mm height, length (depth) adjustable from 440 to 750 mm.
Comes with two end pieces with radius and 4 screws M5.
Gitterrinnen - senkrecht
15HE - 48HE, Metall
Basket trays for vertical cable management between the 19" extrusions (rails).
Comes with 2 vertical holders and mounting kit.
Installation in Datwyler racks DNRP and DNRS: on vertical holders (enclosed).
Installation in Datwyler racks DSRP...
Kabel-Management-Gitter
Seitengitter, 181 mm hoch, lichtgrau
Side grids for cable management, light grey.
For rack depths 600, 800 or 1000 mm.
Installation behind the 19" extrusions (rails).
Comes with 4 holders (delivery without cable ties).
C-Schiene für das Kabel-Management
Montage hinter den 19"-Profilen.
C-Rails for cable management.
For rack depths 800 or 1000 mm.
Installation behind the 19" extrusions (rails).
Comes with 2 holders (delivery without cable ties).
Compatible with standard cable clabs for slot size 16-17mm.
Kabelbügel
schwarz
Cable brackets, plastic, equipped with metal flanges.
To be mounted on the 19" extrusion (rails).
Variants are available for horizontal and vertical cable management.
Kabelbügel
verzinkt
Kabelbügel aus Metall mit Metallflansch.
Montage an den 19"-Profilen.
Varianten für die seitliche oder frontale Kabeleinführung sind erhältlich.
Horizontal cable manement holder set.
For cable trays and side cable management.
For rack depths 600 mm (DNRS, DSRS) and 800 mm (all Datwyler racks).
Comes as a pair including mounting kit.
19"/1U horizontal cable holder.
36 positions.
Delivery without cable ties.
Kabel-Management-Seitenpaneele
15HE - 48HE, Metall, perforiert
Perforated sheet steel side panels for cable management inside racks.
150 mm width.
Can be mounted on the top and bottom frame of the rack.
Set includes one panel and mounting kit.