Patch cords

Measurement / Patch cord PS-GG45 7A
1000 MHz 4P, shielded

Patch cords with PS-GG45 7A plugs allow for Class FA compliant cabling systems (up to 1000 MHz) and for Class F installations (up to 600 MHz). The PS-GG45 7A plug uses only 4 x 2 contacts in the top nd bottom corners of the PS-GG45 7A module,...

As PS-GG45 7A plugs are not compatible with RJ45 jacks, the RJ45 jacks in active devices can be connected to the high-performance cabling system with adapter patch cords only.
These flex cables are fitted with a PS-GG45 7A plug on one side and...

Patch cords with PS-TERATM 4P plugs allow for Class FA compliant cabling systems (up to 1000 MHz) and for Class F installations (up to 600 MHz). 

Measurement cords with PS-TERA 4P plugs are primarily needed for acceptance testings.

PS-TERA...

For multimedia cabling systems with tried and tested copper components and innovative connection technology for Class FA in accordance with EN 50173 and ISO/IEC 11801.

PS-TERATM connectors guarantee highest flexibility: Each port of one 4P...

RJ45 patch cords Cat.6A (IEC)
500 MHz, shielded, wiring 1:1

Shielded patch cords and connection cables with shielded RJ45 plug on both ends, fitted with an overmoulding and an anti-snag boot in the same colour as the cable sheath and with latch protection. The cable CU 7702 flex 4P (Cat.7) offers...

RJ45 patch cords Cat.5/5e
100 MHz, shielded, wiring 1:1

The Datwyler patch cords and connection cables are fitted with a shielded RJ45 plug and a moulded anti-snag boot on both ends.
The cable CU 5502 flex 4P offers an excellent screen performance due to its overall copper braid and is highly...

RJ45 measurement cable Cat.6A (IEC) up to 500 MHz, shielded, with serial numbers for documentation (set with 2 pieces).

For Channel link acceptance testings of Class D, E and EA cabling.
When using test devices with dual measurement...

RJ45 patch cords IP67 Cat.6A (IEC)
500 MHz, shielded, wiring 1:1

Datwyler´s patch cords and connection cables IP67 Cat.6A are especially suitable for the harsh, industrial environment. The IP67 RJ45 plug is compatible with the Datwyler Modular Solution IP67 components.

The cable type CU 7702 4P flex...

RJ45 patch cords Cat.6 UTP
250 MHz, unshielded, wiring 1:1

Datwyler´s unshielded Cat.6 RJ45 patch cords and connection cables (up to 250 MHz) are fitted with a shielded RJ45 plug and a coloured moulded anti-snag boot on both ends.
Plugs and anti-snag boots form one unit.
The shielded RJ45 plugs...

RJ45 patch cords Cat.6 UTP
250 MHz, unshielded, wiring 1:1

RJ45 patch cord, Cat.6 (up to 250 MHz), unshielded, with a RJ45 plug (Cat.6) and a moulded anti-snag boot on both ends.
Unshielded flexible cable U/UTP, 250 MHz, 4P, AWG 24.
Cable sheath made of FR/PVC, also available as FRNC/LS0H.
RJ45 plugs...

RJ45 patch cords Cat.5e UTP
100 MHz, unshielded, wiring 1:1

RJ45 patch cord Cat.5e (up to 100 MHz), unshielded, with a RJ45 plug (Cat.6) and a moulded anti-snag boot on both ends.
Unshielded flexible cable U/UTP Cat.5e, 100 MHz, 4P, AWG 24.
Cable sheath made of FR/PVC, also available as FRNC/LS0H.
RJ45...

EN-60KDS
High-end Network insulator

Compact 1-gigabit network isolator in Keystone construction suitable for device installation or permanent installation.
Can be used in any Keystone-compatible wall outlet panel.
When retrofitting existing installations its rear connecting...

Cable clips 2D
for labelling of patch cords

The Cable clip 2D is suitable to be attached to already existent (cabled) patch cords or can be ordered together with new patch cords as a pre-assembled addition.
Each cable clip can be moved to an easily readable position.
No slipping down...

Anti-dust cover for RJ45 modules

Anti-dust cover for RJ45 plug